주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Lauren- 에 의해 수정

편집 승인됨 완료자 Lauren

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Gently lift the metal plate off of the drive assembly.
-[* icon_caution] Be careful not to sever the red wire or ribbon cable still attached to the two halves of the drive assembly.
+[* icon_caution] Be careful not to sever the red wire or the white ribbon cable still attached to the two halves of the drive assembly.
[* black] Then flip the two halves of the drive assembly upside down as shown in the third picture.