이 단계의 변경 사항
편집자 Dan H-
편집 거부됨 완료자 Scott Havard
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Blow Clean with Air and then Reassemble |
|---|---|
| + | [* black] Use a can of compressed air to blow the Mac clean before you re-assemble it. Be careful not to tip the can and blow wet material. A special anti-static vacuum can work well too, just don't use a standard vac. |
| + | [* black] Blow out all the vents along the bottom and the one behind the mac up above the power input as well. Cautiously blow around the Fan and Circuit Board/s until the unit is clean. |
| + | [* black] Free flowing vents are really important for proper cooling. |