#1단계의 변경 사항
편집자 Dan H-
편집 거부됨 완료자 Scott Havard
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_caution] When working on the power supply, ***be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. | |
| - | [* black] Disconnect the power supply control cable from the power supply. |
| + | [* black] Disconnect the power supply control cable from the power supply. next, unplug the small connector in the top left corner of the power supply. You must release it before you pull out the board. |