#5단계의 변경 사항
편집자 Terrence Lee-
편집 승인됨 완료자 Terrence Lee
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Slightly loosen the outer nut to adjust the height and angle of the brake pad to align exactly with the rim of the tire. Re-tighten the |
|---|---|
| - | [* black] It is recommended to push the |
| + | [* black] Slightly loosen the outer nut to adjust the height and angle of the brake pad to align exactly with the rim of the tire. Re-tighten the nut with the Allen wrench once finished. |
| + | [* black] It is recommended to push the assembly arm while doing the above in order to simulate how the brake lever will engage the brake pads. |