#5단계의 변경 사항
편집자 Sarah Westberg-
편집 승인됨 완료자 Sarah Westberg
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] With wheel pulled back, tighten the two axle nuts using the 15mm socket wrench. Tighten the non-drive side (side without the chain) first. |
|---|---|
| - | [* black] Wheel will angle as you tighten. Keep it centered with your hand as you finish tightening both axle nuts. |
| - | [* black] Use tire pump to make sure tire is full of air and ready to ride |
| + | [* black] With the wheel pulled back, tighten the two axle nuts using the 15 mm socket wrench. |
| + | [* black] Tighten the non-drive side (side without the chain) first. |
| + | [* black] The wheel will angle as you tighten. Keep it centered with your hand as you finish tightening both axle nuts. |
| + | [* black] Use a tire pump to make sure the tire is full of air and ready to ride. |