Xbox Series X|S Controller (Model 1914) Bumper Cover Replacement 단계 #1 기록

	[title] Unclip the USB-C port cover
-	[* icon_note] The USB-C port cover is held in place by two plastic clips.
-	[* black] Insert the flat end of a spudger ~~beneath~~ the right ~~clip mount of the~~ USB-C port cover.
-	[* black] Pry up the ~~clip mount~~ to release the ~~plastic~~ clip.
-	[* black] Repeat the procedure ~~with~~ the left clip ~~mount~~.
+	[* icon_note] The USB-C port cover is held in place by [link\|https://guide-images.cdn.ifixit.com/igi/RbioxJf1tdIiCEEy.full\|two plastic clips].
+	[* black] Insert the flat end of a spudger under the right USB-C port cover clip.
+	[* black] Pry up with the spudger to release the clip.
+	[* black] Repeat the procedure to release the left clip.