#2단계의 변경 사항
편집자 Spencer Day-
편집 승인됨 완료자 Spencer Day
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [title] Heat the mmWave antenna adhesive |
|---|---|
| - | [* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/GNcuFYxfKlBJ41Zx.full|Three pieces of strong adhesive|new_window=true] secure the mmWave antenna cable to the midframe. |
| - | [* black] [guide|25705|Heat an iOpener|new_window=true] and lay it on the mmWave antenna cable for two minutes to soften the adhesive. |
| + | [title] Heat the 5G mmWave antenna adhesive |
| + | [* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/GNcuFYxfKlBJ41Zx.full|Three pieces of strong adhesive|new_window=true] secure the 5G mmWave antenna cable to the midframe. |
| + | [* black] [guide|25705|Heat an iOpener|new_window=true] and lay it on the 5G mmWave antenna cable for two minutes to soften the adhesive. |
| [* icon_note] Alternatively, you can use a [guide|157348|hair dryer|new_window=true], [guide|151116|heat gun|new_window=true], or hot plate—but be careful as, extreme heat can damage the battery. |