#13단계의 변경 사항
편집자 Evan Noronha-
편집 승인됨 완료자 Evan Noronha
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air. | |
| - | [* icon_ |
| + | [* icon_reminder] When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place. |