#1단계의 변경 사항
단계 라인
| + | [title] Opening the back panel |
|---|---|
| + | [* black] The unit has 3 main parts: |
| + | [* black] LED Matrix with the PCB. |
| + | [* black] Metal shell |
| + | [* black] Back plastic plug |
| + | [* red] Both parts are press fit into the metal shell. You will have to use tools to pry it open. ***Mind the O-rings*** designated in red |
| + | [* yellow] I found it easier to use the hook tool and insert it in between the usb-c port and rubber plug loop to get under the plastic. |
| + | [* icon_caution] ***Be mindful of the battery*** when using anything sharp. There is not much room between the battery and your prying tools |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가