#4단계의 변경 사항
단계 라인
| + | [title] The other side of the PCB |
|---|---|
| + | [* red] If you had water intrusion and you want to get access to the other side of the PCB you will have desolder all 4 contact points |
| + | [* icon_caution] It might be difficult soldering them back together as the gap between the pcb and metal frame is just long enough that sometimes solder just stays on both pieces without connecting |
| + | [* red] In that case I would suggest using wick to bridge the gap |
이미지 1
이전 이미지 없음
추가