#3단계의 변경 사항
편집자 Christopher Renteria-
편집 승인됨 완료자 Christopher Renteria
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] ***Slowly ***peel off the two rubber stoppers found at the top corners of the laptop. | |
| - | [* black] This will expose two additional 10mm screws required to remove the back plate. |
| + | [* black] This will expose two additional Philips #00 10mm screws required to remove the back plate. |
| [* icon_caution] Be careful not to peel off the rubber stoppers too quickly as it could cause the adhesive on the rubber stopper to strip off. |