#6단계의 변경 사항
편집자 Andrew Bookholt-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] This step is only for glossy display machines. If you have an anti-glare display, skip this step. |
|---|---|
| [* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case. | |
| [* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit. | |
| [* black] Lift the camera cable retainer out of the upper case. |