#4단계의 변경 사항
단계 라인
| + | [title] Cut out the old swivel and thread wires through cable gland. |
|---|---|
| + | [* black] Be sure to not forget to thread the end cap on the wire before threading the power wires through the gland. |
| + | [* black] Test the fit in the device. You may have to sand the plastic gland a bit to get that perfect fit. |
| + | [* black] I had to sand down the end cap (shorten it a bit) to get the end cap to tuck into the iron and really tighten on the wiring. The photo shows the end cap before being shortened. |
| + | [* black] I used a dremel tool to grind down the cap. |
이미지 1
이전 이미지 없음
추가