#16단계의 변경 사항
편집자 Jeremy Mikesell-
편집 승인됨 완료자 Jeremy Mikesell
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Install PCB into housing |
|---|---|
| + | [* black] Apply thermal grease to the flat raised areas under the PCB |
| + | [* black] Install PBC, it is very tight to get the PCB into place. You will need to bend the wires out of the way very close to the connectors. But it will fit |
| + | [* black] Once you have the main PCB under the connectors and under the ledge for the LED emitter assembly. Apply thermal grease to the backside of of the LED assembly. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가