#4단계의 변경 사항
편집 승인됨 완료자 Christopher Leon Farmer
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Pull the spring from the base of the rod, where the clamp previously rested. | |
| [* black] Install your replacement spring into the previous spring's location. | |
| - | [* icon_note] If your original spring is intact, it may have become misaligned. If so, reinsert the spring into the location |
| + | [* icon_note] If your original spring is intact, it may have become misaligned. If so, reinsert the spring into the location shown in the images. |