#6단계의 변경 사항
편집자 Jasper Fleischhauer-
편집 승인됨 완료자 Jasper Fleischhauer
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Start lifting the front panel assembly |
|---|---|
| [* icon_note] Make sure the suction cup is firmly attached to the front panel assembly. | |
| [* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case. | |
| [* icon_note] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices. | |
| [* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup. | |
| [* icon_note] There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. |