주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#15단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a plastic opening tool to disconnect the digitizer cableLCD cable connector.
[* icon_caution] The LCD and Digitizer connectors are on the same cable assembly, so prying the digitizerLCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.
[* black] Use a plastic opening tool to disconnect the digitizer cableLCD cable connector.
[* icon_caution] The LCD and Digitizer connectors are on the same cable assembly, so prying the digitizerLCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.
[* icon_reminder] When reassembling your phone, the LCD cable may pop off its connector. A blank screen, or white lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.