#3단계의 변경 사항
편집자 Erik Hoffnagle-
편집 승인됨 완료자 Erik Hoffnagle
- 이전
- 이후
- 변경 사항 없음
단계 라인
+ | [* black] After removing the two cover screws, lift and slide the cover out of position to access the hard drive. (Note from Andy: You should show the screwdriver unscrewing one and give the size of the screws and the driver.) |
---|---|
[* black] After removing the two cover screws, lift and slide the cover out of position to access the hard drive. (Note from Andy: You should show the screwdriver unscrewing one and give the size of the screws and the driver.) | |
[* red] Grab the clear plastic pull tab on top of the hard drive, and lift the hard drive from the laptop. | |
+ | [* black] Locate the screws that hold the first hard drive cover in the bottom right corner. |
+ | [* black] Remove the two screws using a Philips #0 screwdriver. |
+ | [* icon_caution] The screws should remain in the cover. |