주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

편집자 Erik Hoffnagle-

편집 승인됨 완료자 Erik Hoffnagle

이전
이후
변경 사항 없음

단계 라인

[* black] After the hard drive has been removed from the laptop, it must then be removed from its bracket.
[* red] Start by gently pulling the HP hard drive adapter from the end of the hard drive.
-[* orange] Remove the 3mm bracketing screws on ''both'' sides of the hard drive bracket (2 per side) using a Phillips #0 screwdriver.
+[* orange] Using a Phillips #0 screwdriver, remove the four 3 mm bracketing screws on ''both'' sides of the hard drive bracket (2 per side) .
[* black] Lift the hard drive from its metal bracket.