#4단계의 변경 사항
편집자 Luke Soules-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] This is a diagram of the trackpad ribbon clamp connector you will disconnect in the next step. |
|---|---|
| + | [* black] 1) With your fingernails, grasp the locking bar on either side slide it a small amount (about 1/16" or 2 mm) towards the battery. |
| + | [* black] 2) After disengaging the locking bar, slide the cable out of the connector. |