주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

편집자 iRobot-

승인 대기 중

이전
이후
변경 사항 없음

단계 라인

+[* black] Remove the following 10 screws from the bottom case:
+ [* red] Three 1.7 mm Phillips from the front edge of the battery compartment.
+ [* orange] One 3.9 mm T8 Torx to the right of the memory card.
+ [* yellow] One 6.9 mm T8 Torx at the left edge of the memory compartment.
+ [* green] Three 12.4 mm Phillips from the center of the row of screws along the back edge of the case.
+ [* blue] Two 15.1 mm Phillips, one from either end of the row of screws along the back edge of the case.

이미지 1

이전 이미지 없음

추가