메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

mpardus- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes. Be sure to reinstall screws into the bottom holes. (bracket screws go into holes above later)
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes. Be sure to reinstall screws into the bottom holes. (bracket screws go into holes above later)