#4단계의 변경 사항
편집자 Philip Le Riche-
편집 승인됨 완료자 Philip Le Riche
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Remove the 2 screws in the bottom case front section. | |
| [* black] Remove a screw from the top, adjacent to the mode wheel. | |
| [* black] Remove the front cover. This requires a fair amount of wiggling in order to release it at the top.There is a hidden clip just to the left of the on/off button which requires a little force to release. Easy does it. | |
| + | [* black] Note the long finger on the top of the front cover which protruded under the top panel to engage with the screw removed in the second bullet. This is very easily bent and broken off. Reattaching it would be challenging. Bear this in mind when you put this part aside, especially if you will be storing it for a little while before reassembly. |