주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

편집자 Geoff Wacker-

편집 승인됨 완료자 Geoff Wacker

이전
이후
변경 사항 없음

단계 라인

[* black] When you feel increased resistance from the adhesive strip, pull it gently around the lower left corner of the battery.
[* icon_caution] Don't allow the adhesive strip to snag on the corner of the battery, or it may tear or break off.
[* black] Continue pulling the adhesive tab upward and away from the left edge of the battery, allowing it to slowly slide out from between the battery and the rear case, until the strip comes free from the iPhone.
- [* black] If you removed both adhesive strips successfully, ***skip the next two steps and continue on Step 44.***
+ [* black] If you removed both adhesive strips successfully, ***skip the next two steps and continue on Step 46.***
[* black] If either of the adhesive strips broke off underneath the battery and could not be retrieved, ***continue with the next step below***.