#11단계의 변경 사항
편집자 Brett Hartt-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector. | |
| - | [* black] With the pointed end of the spudger, pull the UNKNOWN cable from it's connector on the logic board. |
| - | [* |
| + | [* black] With the pointed end of the spudger, pull the UNKNOWN cable from it's connector on the underside of the logic board. |
| + | [* icon_note] The logic board is now free of the upper case. |