#3단계의 변경 사항
편집자 keystone-
편집 거부됨 완료자 Adam O'Camb
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] |
|---|---|
| + | [* black] There *may* be a adhesive sheet over the ribbon cable connector on the bottom of the drive. Remove that first. Then, use your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket. |
| [* icon_caution] Be sure you are prying up on the retaining flap, ***not*** the socket itself. | |
| [* black] Pull the ribbon cable out of its socket. | |
| [* black] Remove the Blu-ray drive from the PS3. | |
| [* icon_reminder] If replacing the Blu-ray drive, transfer the power cable to your new drive. |