#10단계의 변경 사항
편집자 Miguel Gomez-
편집 승인됨 완료자 Miguel Gomez
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] Make sure skewer is completely inserted into the frame slots before tightening. | |
| - | [* orange] Rotate the skewer clockwise and ensure a snug contact between the skewer caps and the frame slots. |
| + | [* orange] Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots. |
| [* yellow] Rotate the skewer lever towards the bicycle frame. | |
| - | [* icon_note] If the skewer lever is too difficult to |
| + | [* icon_note] If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug. |