주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

편집자 Erica Partida-

편집 승인됨 완료자 Erica Partida

이전
이후
변경 사항 없음

단계 라인

-[* orange] next, remove the four Phillips 2.0×3.0 screws at each corner that secure the display panel to the enclosure. Then you can remove the hinges on each side.
-[* red] remove the display panel cable by first releasing the adhesive strip then you can safely disconnect the display panel cable form its port.
-[* black] You can also view this maintenance and service guide provided by hp here: http://h10032.www1.hp.com/ctg/Manual/c02494476
+[* orange] Next, remove the four Phillips 2.0×3.0 screws at each corner that secure the display panel to the enclosure. Then, you can remove the hinges on each side.
+[* red] Remove the display panel cable by releasing the adhesive strip. Then, you can safely disconnect the display panel cable from its port.
+[* black] You can also view this maintenance and service guide provided by HP here: http://h10032.www1.hp.com/ctg/Manual/c02494476