#2단계의 변경 사항
편집자 William DiVittorio-
편집 승인됨 완료자 William DiVittorio
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] Arrange the chain in the chain breaker so the connector aligns with the press. | |
| [* icon_caution] Slowly tighten the screw until the connector begins to slide out of the link. DO NOT push the connector all the way out. | |
| [* icon_reminder] DO NOT push the connector all the way out, only enough to separate the links. This is essential in reconstructing your chain without purchasing a master link. | |
| + | [* black] Now that you have your old chain off, you can either clean it or replace it. If you replace the chain make sure you buy the correct length and size! |