#3단계의 변경 사항
편집자 Alex Sireci-
편집 승인됨 완료자 Alex Sireci
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Insert New LED |
|---|---|
| [* black] Place the new LED through the holes where the old one was | |
| [* black] If it does not stay, you can tape it in place on the opposite side of the board | |
| [* black] Ensure the LED is on the same side of the board as the one you removed was | |
| [* black] Warm up the trace on the circuit board and the LED lead with the soldering iron | |
| + | [* icon_reminder] Wipe your soldering iron on the damp sponge every time you pick it up |
| [* black] Apply solder to the lead until the hole is filled with solder |