#1단계의 변경 사항
편집자 Zak McFarland-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_reminder] Before disassembling your printer, be sure that the printer has been unplugged. | |
| [* black] Rotate the printer 90 degrees counter clockwise so that the side panel nest to the control panel is facing you. | |
| - | [* red] Remove the two |
| + | [* red] Remove the two T10 Torx screws from the left side panel. |