#3단계의 변경 사항
단계 라인
| [* black] Slide *tool* underneath the following components and remove from case to expose more screws. | |
| [* yellow] Two black rubber feet attached with adhesive. | |
| - | [* yellow] Remove two |
| + | [* yellow] Remove two 9/32" Phillips 0 screws. |
| [* orange] One thin plastic cover attached with adhesive. | |
| - | [* orange] Remove one |
| + | [* orange] Remove one 9/32" Phillips 0 screws. |
| [* red] Once these screws have been removed, take off end caps. |