#1단계의 변경 사항
편집자 Aaron Morland-
편집 승인됨 완료자 Aaron Morland
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* red] With a Phillips 00 |
|---|---|
| + | [* red] With a Phillips 00 screwdriver, remove the one 3.8 mm screw in the LED chip. The LED chip is a small green chip (about 1 square centimeter) located at the top center of the device. |
| [* black] Gently remove the chip with a pair of precision tweezers by grabbing the chip from one side, being careful not to pinch on a black piece of hardware on the chip. |