주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

편집자 Steven Loon-

편집 승인됨 완료자 Steven Loon

이전
이후
변경 사항 없음

단계 라인

-[* black] Unscrew five screws from the circuit board using a #00 Phillips screwdriver.
-[* icon_note] Two screws are located below the fan, and three are along the circuit board's right edge.
+[* red] Unscrew five screws from the circuit board using a #00 Phillips screwdriver.
+ [* icon_note] Two screws are located below the fan, and three are along the circuit board's right edge.
[* icon_reminder] When reinserting the screws, the black screw goes in the lower-right corner.