#3단계의 변경 사항
편집자 MeKenzie Hilsmeyer-
편집 승인됨 완료자 MeKenzie Hilsmeyer
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Using a tool that fits, push the tool through the hole the previous black screw was in to push the pin out of the other side of the hinge. |
|---|---|
| - | [* black] When the pin is removed the two sides of the device can now separate. Be sure to collect the spring that is next to the hinge when they are separated. |
| + | [* black] Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side. |
| + | [* black] When the pin is removed the two sides of the device can now separate. |
| + | [* icon_note] Be sure to collect the spring that is next to the hinge when they are separated. |