#13단계의 변경 사항
편집자 Lucy Wiswall-
편집 승인됨 완료자 Lucy Wiswall
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Install the latch: | |
| [* icon_note] This step requires a 1/2" socket wrench (or an adjustable wrench). | |
| [* red] Bolt the two latch plates together on one end, on the the inside of the gate frame. | |
| [* orange] Insert the latch between the two plates, on the outside of the gate frame. | |
| - | [* orange] |
| + | [* orange] Insert a bolt and nut, and tighten to secure the latch. |
| [* icon_note] Make sure the latch is loose enough to swing up and down. |