#17단계의 변경 사항
편집자 Andrew Bookholt-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Use a spudger to pry the two serial ATA connectors straight away from the hard drive. |
|---|---|
| + | [* black] Insert the flat end of a spudger into the gap between the SATA data connector and the hard drive. |
| + | [* black] Twist the spudger to separate the SATA data connector from the hard drive, then disconnect it from the hard drive. |
| + | [* icon_note] Repeat this process for the SATA power connector. |