#4단계의 변경 사항
편집자 Kyle Smith-
편집 승인됨 완료자 Kyle Smith
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Use a spudger to loosen the two plastic tabs next to the induction coil that secure the internal assembly to the frame. |
|---|---|
| [* black] Push on the rotating head in order to pop the assembly out of the black plastic casing. | |
| [* icon_caution] You can also use a spudger to leverage the assembly out, but this may break the copper wire connected to the induction coil, so be careful. |