주요 콘텐츠로 건너뛰기

Lenovo Thinkpad X240 Components Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
Lenovo Thinkpad X240 Components Replacement, Remove motherboard: 0 단계, 이미지 3개 중 1개 Lenovo Thinkpad X240 Components Replacement, Remove motherboard: 0 단계, 이미지 3개 중 2개 Lenovo Thinkpad X240 Components Replacement, Remove motherboard: 0 단계, 이미지 3개 중 3개
Remove motherboard
  • Remove connectors

  • Start with the large connector in the middle at the bottom of the motherboard. Here it is marked in red.

  • Then ease up the two connectors, one underneath the large connector just removed. These are done by raising the black tab on the connector to vertical then pulling gently on the ribbon cable. These are marked in orange in the photo.

  • Also lift the connector on the upper left of the keyboard, marked in orange. Just unplug it by lifting it up with your nails or with a small screw driver

  • Ease the antenna cables for the wifi and 3G out of their black holder, and pull the holder off the motherboard towards the top side of the laptop. This is marked in yellow.

  • Underneath you will find one screw, which you should remove.

  • Another two motherboard screws are marked in green, these should be removed.

  • Remove the motherboard by easing it to the right from under a tab marked in blue near the BIOS battery, and gently placing it back towards the top of the laptop.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.