주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
4단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

To make this step easier, you can prop up the heated edge of the phone on something that is about 0.5 inches (13 mm) thick, like an eraser. This will angle the phone so that the opening tool is easier to insert.

If you don't have a small object for propping, you can (carefully) perform this step at the edge of a desk or table to achieve the same angle of entry.

Lift the rear panel's bottom edge with your suction cup, opening a slight gap between the panel and the frame.

This may require a significant amount of force. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

Once you've created a gap, press the flat end of an opening tool into the gap.

The rear glass panel is fragile and can break if you use too much force or attempt to pry with metal tools.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.