주요 콘텐츠로 건너뛰기

How to Replace a Bike Chain With a Master Link

3 단계
How to Replace a Bike Chain With a Master Link: 0 단계, 이미지 3개 중 1개 How to Replace a Bike Chain With a Master Link: 0 단계, 이미지 3개 중 2개 How to Replace a Bike Chain With a Master Link: 0 단계, 이미지 3개 중 3개
  • Disengage the master link by pushing the links on either side of it together.

  • If this is too difficult by hand, use a pair of needle nose pliers to squeeze pins of the master link together.

  • After the master link is disengaged, pull the chain apart by separating the two halves of the master link.

  • Pull the two halves of the master link out of each end of the chain, and set them aside.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.