주요 콘텐츠로 건너뛰기

E-bike Disassembly of frame for painting (model: HNF UD1)

49 단계
E-bike Disassembly of frame for painting (model: HNF UD1), NuVinci gear shifter cable setup: 0 단계, 이미지 3개 중 1개 E-bike Disassembly of frame for painting (model: HNF UD1), NuVinci gear shifter cable setup: 0 단계, 이미지 3개 중 2개 E-bike Disassembly of frame for painting (model: HNF UD1), NuVinci gear shifter cable setup: 0 단계, 이미지 3개 중 3개
NuVinci gear shifter cable setup
  • The NuVinci gear shifter is on the right side.

  • The cables are tied together with the supernova lamp's thin cable (in comparison to Intuvias thicker cable) .

  • These cables go down on the left side of the frame. Then cross under the black part below the battery and exit on the right side (only the two Nuvinci cables from here). Then it goes down to the inner part of the frame's back triangle and has three plastic holders.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.