주요 콘텐츠로 건너뛰기

E-bike Disassembly of frame for painting (model: HNF UD1)

22 단계
E-bike Disassembly of frame for painting (model: HNF UD1), Remove the black design cover: 0 단계, 이미지 1개 중 1개
Remove the black design cover
  • Remove the screw next to the battery charging port with a PH1 Screwdriver [marked with red circle]

  • This screw is the smallest of the three types

  • Remove the upper screw with a 3 mm hex key on both sides. (2x in total) [marked with blue circle on this side]

  • These screws are slightly longer and thinner, than the lowest screws

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.