주요 콘텐츠로 건너뛰기

E-bike Disassembly of frame for painting (model: HNF UD1)

9 단계
E-bike Disassembly of frame for painting (model: HNF UD1): 0 단계, 이미지 3개 중 1개 E-bike Disassembly of frame for painting (model: HNF UD1): 0 단계, 이미지 3개 중 2개 E-bike Disassembly of frame for painting (model: HNF UD1): 0 단계, 이미지 3개 중 3개
  • Proceed using a T25 torx screwdriver to remove the 2 screws holding the plastic cover in place on the right side of the frame

  • approximately where earlier the belt placeholder was

  • After all these screws (4 in total on this side) are removed, the plastic cover can be lifted and removed

  • Proceed to the other side

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.