6 단계 번역중
6 단계
Take out the motor and length-adjustment-assembly
-
The assembly is held in place by one Torx T8 screw, identical to those from step 3.
-
The ring of the length-adjustment-assembly can slide down. A little pin-and-spring will fall out - don't loose it! It is used to make the "clicking" feedback when rotating the ring.
-
I did not disassemble this assembly any further.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.