내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

HP All-in-one PC Model 24 Motherboard Replacement

이전 단계 다음 단계

13 단계 번역중

안내서로 돌아가기

영어

한국어

13 단계

HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Power Button: 0 단계, 이미지 2개 중 1개

HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Power Button: 0 단계, 이미지 2개 중 2개

Removing the Ribbon Cable from the Power Button

Release the Cable's Connector: Carefully release the ribbon cable from its connector on the motherboard. The connector has a latch, gently lift it up to release the cable. The same way as in step 6.
Disconnect the Ribbon Cable: Once the latch is released, gently pull the ribbon cable out its connector.
Note: Be sure not to pull on the cable too forcefully to avoid damaging the cable or the connector.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.