주요 콘텐츠로 건너뛰기

Power Mac G4 Quicksilver Central Processing Unit Replacement

3 단계
Power Mac G4 Quicksilver Central Processing Unit Replacement: 0 단계, 이미지 2개 중 1개 Power Mac G4 Quicksilver Central Processing Unit Replacement: 0 단계, 이미지 2개 중 2개
  • You need detach the heat sink from the CPU. Locate the four clamps holding it down, two on each side.

  • Taking off the clamps can be difficult. Use a screwdriver to push down on the top of the clip. Then insert a spudger below the heat sink to pull it away from the board, releasing the heat sink.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.