주요 콘텐츠로 건너뛰기

iPod Touch 4th Generation Front Panel Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

2 단계
iPod Touch 4th Generation Front Panel Replacement: 0 단계, 이미지 2개 중 1개 iPod Touch 4th Generation Front Panel Replacement: 0 단계, 이미지 2개 중 2개
  • Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

  • Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.

  • Do not try to pry between the plastic bezel and the steel rear case.

  • Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.

  • If it is too difficult to pry up the front panel assembly, reheat it and try again.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.