주요 콘텐츠로 건너뛰기

PSP 300xc Home Bar Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

1 단계 번역중

1 단계
PSP 300xc Home Bar Replacement: 0 단계, 이미지 3개 중 1개 PSP 300xc Home Bar Replacement: 0 단계, 이미지 3개 중 2개 PSP 300xc Home Bar Replacement: 0 단계, 이미지 3개 중 3개
  • Lift the home bar up as high as it will go, but not so high that the wires disconnect.

  • Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.

  • Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.

  • The home bar should now lift out of the PSP 300xc.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.