주요 콘텐츠로 건너뛰기

Braun Series 7 790cc-7 Ladebasis-Kabelbaum tauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

2 단계
Braun Series 7 790cc-7 Charging Base Wire Harness Replacement: 0 단계, 이미지 3개 중 1개 Braun Series 7 790cc-7 Charging Base Wire Harness Replacement: 0 단계, 이미지 3개 중 2개 Braun Series 7 790cc-7 Charging Base Wire Harness Replacement: 0 단계, 이미지 3개 중 3개
  • Depress the 4 tabs while lightly pulling the cover from the base.

  • Next, depress the 2 molded tabs while still pulling the cover from the base.

Drücke die vier Laschen nach unten, während du gleichzeitig die Abdeckung leicht vom Boden abziehst.

Drücke als nächstes die zwei geformten Laschen herunter, während du die Abdeckung immer noch von der Basis ziehst.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.